AOpen 4-Port 10/100Mbps Ethernet Broadband Router Especificaciones Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 50
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
- 23 -
card’s Physical Address).
IP Address Filter Filter with computer’s IP address.
Single/Range You can filter a single IP, or a range of the IP
addresses.
IP Range Enter the Start and End IP addresses for a range of
IP addresses for filter/forward.
Direction ~From Local IP ~To
Remote IP
Filtering IP address of a local computer; or
filtering IP address of a remote server (this remote
server connects to the device via Internet).
TCP/UDP Port Filter Filter using the port number. You can set filter for
a single port or a range of ports.
Please note that performing the
Factory Reset will erase all previously
entered device settings.
Filter/Forward
Select to Filter or Forward for the following
assigned port(s).
Single/Range You can filter a single port, or a range of ports
Port Number The port number(s) for the filters.
Port Type TCP port: filter according to the Connection-
Based Application Service on the remote server
using the port number.
UDP port: filter according to the Connectionless
Application Service on the remote server using the
port number.
Figure 5
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 49 50

Comentarios a estos manuales

Sin comentarios