AOpen AOI-702U Especificaciones descargar pdf (Pagina 15)

Board inspection begins according to the board setup. When the inspection is

finished, the results dialog will display.

This dialog shows the inspection results. The word PASS with a green

background appears on the top half of the dialog if all the Devices inspected

passed the inspection. If the examined board does not pass the inspection the

word FAIL with red background will be displayed. The system is also equipped

with a green PASS light and a red FAIL light.

If the board fails the inspection, the button, Review Failures, will be enabled.

Pressing the button starts the review process. In this process the system

positions the Image to the Device that failed the inspection while displaying

the Device’s templates at the top right corner of the screen. This allows the

user to compare the failed Devices with their templates. Optionally the user

can classify the defects, or override a failed Device during the review.

The Skip SPC Info check box is only applicable when SPC data log is

enabled. When the box is checked, no entry will be made to the SPC log for

this board. This is to avoid logging invalid inspection results in case a wrong

board is loaded into the machine by mistake.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 133 134

Sin comentarios

AOpen AOI-702U Especificaciones Pagina 15