
APPENDIX A - VFD CENTRIFUGE HMI SERVER SYSTEM
15 May 13 A-9
Appendix A-HMIServerSystem
Figure A-14. DeskLock Screen
Troubleshooting Network Connectivity
The following IP addresses of all system components permit entry into the router configuration to
verify that the router is communicating:
X1 WAN Port X2 LAN Port
Router 1 https://100.100.10.1 https://100.100.100.101
Router 2 https://100.100.10.2 https://100.100.100.101
Router 3 https://100.100.10.3 https://100.100.100.101
Router 4 https://100.100.10.4 https://100.100.100.101
LAN Port #1 LAN Port #2
HMI Server PC 100.100.10.101 Assigned by DHCP
Activation PLC 100.100.10.100
Use the following Network Address Translation (NAT) data to verify that connections are correct
and that communication is established between the PLC and routers:
X1 WAN Port of Router X2 LAN Port of Router
PLC 1 100.100.10.10 100.100.100.10
PLC 2 100.100.10.20 100.100.100.10
PLC 3 100.100.10.30 100.100.100.10
PLC 4 100.100.10.40 100.100.100.10
To assist in troubleshooting communication defects, a customer PC may be connected as shown
in Figure A-15 to ping the routers to verify communication.
Comentarios a estos manuales