AOpen AOI-702U Especificaciones descargar pdf (Pagina 86)

Operations | Reference Manual

FocalSpot, Inc. | www.FocalSpot.com

Page | 86



Once an AOI Inspection has completed and the operator has verified (“Accepted” or “Failed and Classified”) all

suspect devices (if any); an inspection report will automatically be generated. AOI Inspection Reports contain a

graphic depiction of the XY device layout of the board, error location marks (red arrows), Part Reference ID,

Part Number and Fault Classifications for each failed device (if any).

AOI Mode reports can be saved, emailed or printed. The First Article report and board can then become the

deliverable to a customer for review, functional test and sign-off prior to initiating the actual production run.

1. To Preview the Inspection Report “On Screen”, select (check) the <Preview on Screen> option in the

<PCB Inspection Results> Dialog Box.

2. To Print a copy of the Inspection Report to a local or network printer, select (check) the <Print

Results> option in the <PCB Inspection Results> Dialog Box. Doing so will immediately print a copy

of the report to the default configured printer.

NOTE: Print After Review is the preferred use of the Print function. Also Print can be configured to

output PDF or setup to send SPC data to a file. See: Setting Up SPC Data Logging for more

information on this topic.

PCB Inspection Results Print Results >Print Results Alert

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 164 165

Sin comentarios

AOpen AOI-702U Especificaciones Pagina 86